Accurate Toyota Hilux AN110 AN120 AN130 dimensions drawings are essential for owners, modifiers, and buyers who need precise body and bed measurements. This reference material supports panel fitting, accessory selection, and workshop planning by providing verified length, width, and height data for each model year.
Below is a structured summary of key dimensional ranges and layout points derived from factory Toyota Hilux double cab specifications for AN110, AN120, and AN130 generations. Use this summary as a quick checkpoint before reviewing detailed drawings.
| Model Code | Key Body Length Range (mm) | Width Mirror to Mirror (mm) | Bed Length Range (mm) |
|---|---|---|---|
| AN110 Double Cab | 5,245 – 5,275 | 2,070 – 2,090 | 1,475 – 1,525 |
| AN120 Double Cab | 5,250 – 5,280 | 2,075 – 2,095 | 1,480 – 1,530 |
| AN130 Double Cab | 5,255 – 5,295 | 2,085 – 2,110 | 1,490 – 1,540 |
| Doors & Access Notes | Front doors influence approach angles; rear doors affect cabin and bed usable length | ||
AN110 AN120 AN130 Length And Overall Width Details
Length and overall width define the Hilux double cab’s presence on public roads and job sites. For the AN110, AN120, and AN130 double cab models, length typically ranges between 5,245 mm and 5,295 mm depending on configuration and model year. Width, measured mirror to mirror, generally falls between 2,070 mm and 2,110 mm, with variations linked to front bumper design and towing equipment packages.
Impact On Loading And Parking
Small differences in overall length affect garage fit and turning circle radius, while width influences lane positioning and garage clearance. Consulting exact factory drawings helps prevent underbody or corner damage during routine use and off-road excursions.
Bed Dimensions And Rear Overhang Reference
Bed length is one of the most critical Toyota Hilux double cab dimensions for utility owners. Across the AN110, AN120, and AN130 series, bed length typically spans roughly 1,475 mm to 1,540 mm, depending on cab style and bed configuration. Rear overhang, the projection behind the rear axle, is comparatively modest, contributing to balanced handling on rough terrain and in tight workshop bays.
Tailgate And Access Considerations
Tailgate design and hinge placement slightly alter effective bed length and opening ease. Precise measurements from tailgate edge to bed sill support correct tray liner fitting and tonneau cover selection.
Height Ground Clearance And Approach Departure
Height related dimensions define how the Hilux double cab interacts with obstacles and terrain. Ground clearance at the axle varies by suspension setup but remains consistent across AN110, AN120, and AN130 in core configurations, typically supporting both workbed utility and on-road stability. Approach and departure angles are carefully balanced to allow confident negotiation of logs, rocks, and urban curbs without risking undercarriage strikes.
Suspension Travel Effect On Real World Clearance
Factory spring rates and optional lift kits can shift vertical dimensions, so always reference the specific vehicle identification number when using dimension drawings for fitting parts or lift components.
Suspension Wheelbase And Cabin Space Layout
Wheelbase length is a foundational element that influences wheel overlap, turning radius, and rear cabin room. Toyota optimizes the wheelbase across the Hilux double cab range to preserve agile handling while offering usable rear bench space. Seating layout and cab pillars are positioned to maximize visibility without compromising structural rigidity, which is reflected in the published suspension and cabin drawings.
Aftermarket Modifications And Geometry Changes
Lifting, leveling, or widening modifications alter original geometry, affecting both safety and compliance. Cross reference any planned changes with official dimension data to ensure steering, suspension, and body mounts remain within safe operating limits.
Key Takeaways For Builders And Buyers
- Use verified Toyota Hilux double cab dimensions when selecting tonneau covers, bed mats, and tray accessories.
- Confirm exact model year AN110, AN120, or AN130 length, width, and bed measurements with factory drawings tied to your VIN.
- Factor suspension height changes from lifts or leveling kits into approach, departure, and overall height planning.
- Allow extra clearance around tailgate hinges and cab corners for robust protection and all-weather covers.
- Cross check wheelbase and rear overhang data before fitting custom interiors, lighting bars, or recovery accessories.
FAQ
Reader questions
Where can I find factory Toyota Hilux AN110 AN120 AN130 dimensions drawings for my specific build?
Official dimension sheets are available through your Toyota dealer service department using your vehicle identification number, or via the manufacturer’s parts website under body and chassis specifications for your exact model year and market.
How do the AN110, AN120, and AN130 wheelbase and overall length compare across years?
Wheelbase remains very stable across these codes, with minor tweaks to overall length driven by bumper and headlight assembly updates; the most noticeable changes are in bed length rather than cabin overhang.
Can these dimensions be used as a basis for custom canopy and bed liner design?
Yes, verified Toyota Hilux double cab dimensions support accurate templates for tonneau covers, bed liners, and canopies, but always allow for panel spring and mounting hardware clearance based on your specific suspension setup.
Do aftermarket lift kits materially change the approach angle and height dimensions listed in the drawings?
Lift kits increase ground clearance and alter approach and departure angles, so revised geometry calculations are necessary. Use the base AN110 AN120 AN130 dimensions as a reference point, then adjust for spring shackle length, damper travel, and any front bumper changes.