The Navico Active Imaging 3in1 Transom Mount Transducer combines CHIRP sonar, sideimaging, and downimaging into a single, streamlined package. Designed for recreational and light professional vessels, it delivers clear, high‑resolution images directly from the transom.
With flexible frequency options and intuitive installation, this transducer suits anglers who want detailed sonar, sideview, and downview imaging without managing multiple hull‑mounted units.
| Model | Technology | Frequency Range | Installation Type |
|---|---|---|---|
| Active Imaging 3in1 | CHIRP, Side Imaging, Down Imaging | 200 kHz–800 kHz | Transom Mount |
| Compatible Displays | Chartplotters & MFDs | Simrad, Lowrance, B&G | Plug‑and‑play |
| Maximum Depth | Side/Down Imaging | Up to 600 ft | Adjustable sensitivity |
| Mounting Depth | Transom Specific | Approx. 3–6 in under keel | Keel‑hulled or aluminum boats |
| Warranty | Nationwide Coverage | 1 year parts & labor | Supported by Navico service network |
Real‑world Sonar Clarity with Active Imaging
The Active Imaging 3in1 transducer leverages CHIRP technology to produce detailed target separation and accurate depth information. Sideimaging and downimaging deliver wide swath views, helping you spot fish, structure, and hazards with confidence in various water conditions.
By integrating three imaging modes into one compact transom mount, it reduces clutter on the swim platform and simplifies cabling. This is ideal for boats where space and clean installation are priorities.
Installation and Wiring Simplified
Designed for straightforward transom mounting, the Navico Active Imaging 3in1 transducer aligns with standard through‑hull hardware. Proper positioning below the waterline is critical for stable sonar performance and minimal interference.
Use the included template and mounting kit to center the transducer on the flat portion of the transom. Secure with robust hardware, ensure the face is fully submerged, and follow wiring guides for your specific display unit.
Performance Across Water Types
Engineered for both freshwater and saltwater, this transducer maintains consistent signal quality across varying temperatures and salinity. It performs well in calm lakes and moderate offshore conditions, giving you reliable imaging during day trips or extended voyages.
Sideimaging and downimaging provide fine details of nearby objects, while CHIRP sonar enhances target discrimination. This makes the Active Imaging 3in1 suitable for anglers, coastal cruisers, and small‑boat charter operators alike.
Compatibility with Modern Displays
The transducer works with a wide range of Simrad, Lowrance, and B&G multifunction displays. It supports the latest networking standards, ensuring smooth integration with your existing electronics suite.
Before purchase, verify that your display supports the Active Imaging protocol and select the correct frequency band for your hull material and running depth. Matching the transducer to your chartplotter maximizes image quality and feature availability.
Choosing the Right Setup for Your Boat
Optimize your sonar suite with the Navico Active Imaging 3in1 Transom Mount Transducer when you want detailed imaging without multiple hull penetrations.
- Confirm transom flatness and sufficient underwater clearance before mounting.
- Use the included template for precise alignment and secure fastening.
- Select frequency settings that match your typical operating depth and water type.
- Verify compatibility with your display and network wiring harness.
- Test at low speed to fine‑tune placement and image clarity on site.
FAQ
Reader questions
Will this transducer work on my aluminum bass boat?
Yes, the Navico Active Imaging 3in1 Transom Mount Transducer is suitable for aluminum hulls when mounted on a flat, thick transorm plate that ensures proper coupling and consistent sonar performance.
How deep can I expect imaging on side and down modes?
Sideimaging and downimaging can reach depths of up to 600 feet, depending on frequency settings, water conditions, and target density, giving you extensive coverage for navigation and fish finding.
Do I need a special cable for my Simrad unit?
Use a Simrad‑compatible imaging cable that matches your display’s connector and supports the Active Imaging protocol to ensure clean data transfer and high‑resolution sonar imagery.
Is installation on a kayak with a small stern possible?
Yes, with a proper transom bracket or kayak adapter, you can mount the transducer on a small stern area as long as it remains fully submerged and aligned with the water flow for stable readings.