KitchenAid KBSD706MPS00 owners searching for side by side refrigerator parts diagrams often need clarity on component names and layouts. This article organizes visual references, functional descriptions, and practical guidance around the most frequently referenced parts for this specific model.
Accurate identification of parts simplifies troubleshooting, ordering replacements, and communicating with service technicians. The following references and tables focus on the KBSD706MPS00 side by side refrigerator configuration.
| Part Category | Common Name | Function | Typical Location in KBSD706MPS00 |
|---|---|---|---|
| Compressor & Refrigeration | Compressor | Pressurizes refrigerant to enable cooling | Bottom rear cabinet |
| Compressor & Refrigeration | Condenser Coils | Releases heat outdoors | Rear or exterior kickplate |
| Cooling & Airflow | Evaporator Fan Motor | Circulates cold air through refrigerator compartments | Top rear of freezer section |
| Temperature Control | Thermistor & Temperature Sensors | Monitors chamber temperature and relays data to control board | Rear evaporator wall or air duct |
| Power & Entry | Door Hinges & Handles | Support door movement and provide access | Front edges of refrigerator and freezer doors |
| Interior Organization | Shelves, Bins, and Drawers | Store food in refrigerator and freezer sections | Adjustable positions above and below drawers |
Compressor and Refrigeration Components
The heart of the cooling system in the KitchenAid KBSD706MPS00 side by side refrigerator is its compressor and related refrigeration parts. Understanding these components helps pinpoint performance issues such as insufficient cooling or unusual noises.
The compressor operates by cycling refrigerant vapor, increasing pressure and temperature before it moves to the condenser. When examining diagrams, the compressor is typically shown connected to the condenser coils, the capillary tube or TXV, and the evaporator. Maintaining proper refrigerant charge and compressor function is essential for stable temperatures in both compartments.
Cooling System and Airflow Layout
Side by side models like the KBSD706MPS00 rely on a carefully designed cooling system and airflow path to keep the refrigerator and freezer sections at optimal temperatures.
In this configuration, the evaporator fan motor pushes chilled air through the freezer compartment and then into the refrigerator section via a duct or vent panel. Proper alignment of evaporator fan blades and unobstructed airflow channels prevent hot spots and frost buildup on the evaporator coils.
Electrical and Control Board Diagrams
Modern refrigerator control circuitry includes multiple boards, sensors, and wiring harnesses that coordinate compressor cycles, fan operation, and display functions.
Wiring diagrams for the KitchenAid KBSD706MPS00 show power entry points, main control board assignments, and connections to the compressor, fan motors, and temperature sensors. Labeled diagrams help identify which relay controls the compressor start run windings and how the defrost heater is timed to prevent ice accumulation on the evaporator.
Maintenance and Replacement Guidance
Using the correct side by side refrigerator parts diagrams when replacing components reduces installation errors and supports long term reliability.
- Confirm the model number KBSD706MPS00 matches the door hinge pattern and compressor mounting points before ordering replacements.
- Document wire routing and connector orientations with photos before disassembly to ease reassembly.
- Check condenser coil spacing and ventilation gaps to prevent overheating of the compressor.
- Inspect fan blades and evaporator components for frost or debris that can block airflow.
- Use OEM or verified aftermarket diagrams to verify part compatibility with housing and mounting brackets.
Service and Long Term Reliability Planning
Planning for ongoing service using verified parts diagrams reduces downtime and supports consistent cooling performance across the life of the appliance.
Technicians rely on labeled component lists and clear schematic drawings when diagnosing issues with the compressor, fan assemblies, or sensor networks. Access to accurate diagrams improves first time fix rates and supports proper parts selection at the point of order.
FAQ
Reader questions
Where is the evaporator fan motor located in my KBSD706MPS00?
The evaporator fan motor is typically located at the top rear of the freezer section, behind the back panel near the evaporator coils.
How can I identify the correct compressor for my side by side model?
Check the compressor part number on the label attached to the compressor itself and cross reference it with the model number KBSD706MPS00 in the manufacturer parts list or service diagram set.
What does a wiring diagram for this model show that a basic parts list does not?
A wiring diagram illustrates wire colors, connector pinouts, and circuit board assignments, showing exactly how the temperature control board, compressor relay, and fan motor communicate power and signals.
Can I use generic diagrams found online, or should I insist on OEM documentation?
While generic diagrams may show similar layouts, OEM documentation ensures correct wire lengths, connector types, and mounting dimensions specific to the KBSD706MPS00 side by side refrigerator.