The Hikvision Analog Audio Kit with 60W Analog Ampl器和4个6W天花板扬声器 delivers powerful background music and emergency voice coverage for mid sized venues. This combination balances clear sound reproduction with scalable installation across hallways, lobbies, and classrooms.
Designed for professional AV installers, the kit combines a robust 60W analog amplifier with four 6W ceiling speakers to support reliable audio distribution in commercial environments where clarity and coverage are essential.
| Component | Model / Key Spec | Power | Typical Use |
|---|---|---|---|
| Amplifier | 60W Analog Stereo Amplifier | 100–240V AC, 60W output | Lobby, corridor, classroom |
| Speaker | 6W Ceiling Speaker (x4) | 70V/100V, 6W per speaker | CONSTANT_POWEROffice, hall, waiting area |
| Coverage | Combined 4 speaker layout | Up to 24W speaker load | Even distribution for 200–300 sqm |
| Installation | Analog 100V system | Standard 70V/100V wiring | Drop ceiling or suspended install |
60W Analog Amplifier Technical Benefits
Stable Power Delivery
The 60W analog amplifier provides ample headroom for four 6W ceiling speakers while maintaining low distortion. It supports 70V and 100V speaker lines, allowing flexible impedance planning across long cable runs.
Signal Integrity and Control
Balanced line level inputs reduce noise interference from nearby networking equipment. Built over temperature and overload protection help maintain consistent performance in demanding commercial settings.
4×6W Ceiling Speaker Layout
Optimized Placement
Four 6W ceiling speakers create an even coverage pattern when positioned according to room height and ceiling grid spacing. This layout supports uniform volume levels without excessive reflections in corridors and small meeting rooms.
Installation and System Integration
Wiring and Zoning
Analog 100V wiring simplifies adding or relocating speakers. Each zone can be balanced independently, making it straightforward to serve lobbies, hallways, and classrooms from the same amplifier.
Deployment Recommendations
- Perform a coverage map before mounting to avoid dead zones
- Use constant voltage wiring practices for 70V/100V systems
- Verify total speaker load stays within the 60W amplifier spec
- Label speaker taps and zone wiring for faster troubleshooting
FAQ
Reader questions
Can this kit support background music and emergency paging simultaneously?
Yes, the amplifier can handle background music playback while integrating with a fire alarm relay for emergency paging when required by local safety codes.
What is the recommended ceiling spacing for the 6W speakers?
For general offices and hallways, mounting one speaker every 6 to 8 meters typically ensures smooth coverage without noticeable gaps or overlap.
How does the 70V/100V selector switch affect speaker selection?
Setting the speaker taps to 70V or 100V changes the primary load impedance, allowing you to connect more speakers in parallel while staying within the amplifier capacity.
Is external volume control available for individual zones?
Yes, volume control modules can be added at each zone to adjust speaker levels independently without altering the main amplifier output.