GM100 12mm225mm is a precision component widely used in industrial sensing and positioning systems. This overview introduces the key specifications and typical applications of the GM100 12mm225mm module.
Engineers favor the GM100 12mm225mm design for its compact form, reliable performance, and compatibility with automation platforms. The following sections break down the core features, use cases, and operational details.
| Model | Key Dimension | Stroke Range | Typical Use |
|---|---|---|---|
| GM100 | 12mm | 225mm | Linear position feedback |
| GM100 | 12mm | 225mm | Actuator integration |
| GM100 | 12mm | 225mm | Calibration reference |
| GM100 | 12mm | 225mm | Test bench alignment |
Precision Measurement Capabilities
The GM100 12mm225mm configuration is optimized for high-resolution linear measurement. Its travel length and sensor layout support fine position detection.
Repeatability and linearity are critical in this module, enabling reliable data collection in metrology and closed-loop control scenarios. Systems can leverage this for consistent performance over long duty cycles.
Industrial Integration Guidelines
Installing the GM100 12mm225mm module requires attention to alignment, mounting stiffness, and environmental protection. Proper integration minimizes mechanical play and signal drift.
Use shielded cabling and stable power supplies to reduce noise. Follow the manufacturer’s guidance on load ratings and movement profiles to ensure safe operation.
Performance Specifications
Travel and Resolution
With a 225mm travel length and a 12mm core diameter, the GM100 module balances compactness with generous range. Sub-micron resolution is achievable with suitable signal conditioning.
Environmental Robustness
Dust resistance, thermal stability, and shock tolerance are key traits for demanding shop-floor environments. Select models with appropriate sealing and materials for extended reliability.
| Parameter | Value | Unit | Condition |
|---|---|---|---|
| Travel | 225 | mm | Standard |
| Core Diameter | 12 | mm | Fixed |
| Resolution | 0.1 | µm | With interpolation |
| Repeatability | ±1 | µm | Typical |
| Operating Temp | -10 | to | +60 |
| Temperature Range | 5 | to | 35 |
| Vibration Rating | 10 | mm/s | RMS |
| Shock Load | 50 | g | Peak, 11 ms |
Application Scenarios
Factories and test benches benefit from the GM100 12mm225mm module in linear motion feedback and positioning tasks. Its design supports robotics, CNC setups, and material handling systems.
Engineers use the travel and resolution data for system tuning, ensuring that the GM100 12mm225mm fits within broader motion architectures with minimal adaptation.
Operating Recommendations
- Verify alignment of the GM100 12mm225mm module with the motion axis before powering up.
- Use filtered power supplies and twisted pair cabling to minimize electrical interference.
- Schedule periodic calibration checks to maintain long-term accuracy.
- Monitor environmental factors such as temperature swings and contamination levels.
FAQ
Reader questions
Can the GM100 12mm225mm work in outdoor environments?
Yes, when equipped with suitable environmental protection, the module can handle outdoor conditions, but verify sealing ratings for dust and moisture specific to your installation.
What interface options are available for data output?
Common interfaces include analog voltage, incremental digital signals, and fieldbus protocols; confirm compatibility with your controller or PLC.
How does temperature affect accuracy of the GM100 12mm225mm?
Thermal expansion and sensor drift can impact precision; use integrated compensation features or regular calibration cycles in varying temperature conditions.
Is retrofitting GM100 12mm225mm into legacy systems straightforward?
Retrofit feasibility depends on mechanical clearance, wiring, and controller support; consult technical documentation and perform a fit-check before full deployment.