Besto pack of 2 lining paper for walls 10m x 53cm with paste the wall offers a straightforward solution for refreshing interior surfaces without professional help. This format is popular among homeowners who want an efficient, low-mess way to cover large wall areas or create feature accents.
The combination of length, standardized width, and pre-mixed adhesive makes this option suitable for bedrooms, hallways, and commercial spaces where time and precision matter. Understanding the specifications, application steps, and performance factors helps you decide if it matches your project needs.
| Pack size | Dimensions per roll | Surface coverage | Adhesive type |
|---|---|---|---|
| 2 rolls | 10m length x 53cm width | Approx. 10.6m² (depending on pattern match) | Paste the wall ready adhesive |
| Material composition | Standard lining paper structure | Suitability | Smooth to mid-rough walls |
Preparation and surface assessment for lining paper
Proper preparation reduces the risk of bubbles, peeling, and uneven finishing. Inspect walls for cracks, holes, and old loose paint, then repair and clean dust before proceeding.
Check that surfaces are dry, alkaline-neutral, and firm. Remove switches and sockets, and ensure corners and edges are straight enough to align the 53cm width without excessive trimming.
Measuring and cutting to 10m x 53cm
Planning vertical drops
Measure wall height and compare it to the 10m roll length to determine how many full drops you can obtain. Plan cuts so that seams fall in less visible areas, such as behind furniture or near door frames.
Trimming and pattern matching
Allow a slight overhang at ceiling and skirting, then trim precisely with a sharp utility knife. If the lining paper features a pattern, overlap adjacent strips to align motifs before activating the adhesive.
Applying paste the wall adhesive
Rolling on adhesive evenly
Use a short-nap roller to apply the paste the wall adhesive uniformly across the back of the paper, working from the center outward to avoid thick ridges. Adjust roller pressure so the adhesive penetrates the paper without over-saturating and causing transfer.
Booking the paper
Fold the pasted paper gently into a concertina or book position, paste side in, and let it rest for the recommended soaking time. This step allows the adhesive to open up the fibers and improves positioning when positioning the strip on the wall.
Positioning and smoothing techniques
First strip and alignment
Start from a plumb line or corner, ensuring the first strip is straight before pressing it to the wall. Work from the center toward the edges to avoid trapped air and to maintain accurate vertical alignment across multiple strips.
Dealing with bubbles and seams
Use a brush or smoothing tool to press out water and air pockets, focusing on seams and edges. For repositioning, lift the strip gently, reactivate adhesive lightly if needed, and realign carefully to avoid tearing the lining paper.
Key takeaways and recommended workflow
- Check walls are dry, clean, and free from loose material before starting.
- Measure wall height against the 10m roll to plan efficient vertical drops.
- Apply paste the wall adhesive evenly and book the paper for better positioning.
- Align the first strip carefully and work from center to edges to avoid bubbles.
- Trim excess at ceiling and skirting, and reseal edges if necessary for a neat look.
FAQ
Reader questions
Can this lining paper be used on walls with existing paint?
Yes, provided the existing paint is sound, clean, and fully dry. Lightly sand glossy surfaces and consider a primer if the current paint is highly glossy or stained.
How do I match patterns across the 10m x 53cm strips?
Check the pattern repeat indicated by the manufacturer, then plan drops so that motifs align at mid-drop or in concealed areas. Adjust cutting heights to keep seams unobtrusive.
What tools are essential for a clean installation?
A sharp utility knife, a smoothing brush or scraper, a measuring tape, a pencil level, a short-nap roller for adhesive, and a stepladder will help you achieve a professional finish.
How long does it typically take to paste and hang one roll?
Allowing adhesive soaking time, a typical 10m roll may take 30–60 minutes to position and smooth, depending on your experience, wall condition, and pattern complexity.