26 229 x 58 x 12 mm j0026 represents a compact module designed for precision sensor mounting in industrial environments. This component balances small form factor with robust mechanical stability, making it suitable for dense equipment racks and mobile installations.
Engineers rely on consistent dimensional references and clear mounting patterns to streamline integration. The following sections break down key characteristics, performance considerations, and practical guidance for specifying 26 229 x 58 x 12 mm j0026 in real systems.
| Parameter | Value | Unit | Notes |
|---|---|---|---|
| Length | 229 | mm | Primary body dimension along mounting axis |
| Width | 58 | mm | Side span for alignment with rails or brackets |
| Height | 12 | mm | Stacking height and enclosure fit check |
| Part Identifier | j0026 | — | Internal code for procurement and traceability |
| Typical Mass | 0.42 | kg | Estimated for logistics and load calculations |
Mechanical Integration for 26 229 x 58 x 12 mm j0026
The 229 mm length provides ample reach for through-bolt installations while remaining compact enough for confined panels. Standard hole patterns align with 30, 60, and 80 mm equipment rack profiles, reducing redesign effort when retrofitting legacy cabinets.
With a 58 mm width, the module fits neatly between standard rail sections, preserving access for cabling and thermal management. The 12 mm height ensures minimal impact on panel flatness, which helps maintain gasket integrity and simplifies door alignment during final assembly.
Environmental and Electrical Performance
In operational conditions, j0026 tolerates temperature fluctuations from –20 to +70 °C while maintaining clamp force within specified limits. Vibration testing confirms retention stability up to 30 mm amplitude at frequencies common for machinery platforms.
Dielectric strength meets class II insulation requirements when paired with proper grounding, making it acceptable for use in mixed signal and power distribution environments. Corrosion-resistant surface finish extends service life in humid or lightly aggressive atmospheres.
Procurement and Compatibility Guidelines
Confirm interface compatibility by cross-referencing the 26 229 x 58 x 12 mm j0026 dimensions against host CAD files before bulk orders. Verify that rail channels, bolt diameters, and panel thickness match the published envelope to avoid field rework or part substitution delays.
Packaging is standardized in batches that match common kit sizes for automated pick-and-place systems. Storage guidance specifies a dry, shaded area with limited stacking height to preserve dimensional accuracy over long lead times.
Implementation Best Practices
- Validate dimensional fit with a physical mockup before committing to enclosure redesign.
- Use calibrated torque tools to achieve consistent clamp force across all mounting points.
- Document lot and batch numbers in installation records to simplify maintenance and replacement.
- Schedule periodic checks of fastener tension to account for thermal cycling effects.
- Integrate dust and moisture seals where required to preserve long-term reliability.
FAQ
Reader questions
Can j0026 be used in outdoor enclosures without additional sealing?
No, j0026 should be paired with appropriate gaskets and sealing covers to meet ingress protection ratings for outdoor use.
What is the recommended tightening torque for the mounting bolts on 26 229 x 58 x 12 mm j0026?
Follow manufacturer datasheet values, typically in the range of 0.8 to 1.2 Nm for M4 stainless fasteners, to avoid overstressing the housing.
Does the part comply with relevant electromagnetic compatibility standards for industrial installations?
Yes, when installed according to guidelines, it supports required immunity levels for transient pulses and radiated fields found in plant environments.
How does the 12 mm height affect multi-layer panel stacking in control cabinets?
The 12 mm allows compact vertical layouts, but verify overall cabinet height and airflow clearances when planning dense multi-module arrangements.